2007-2018 JK & JKU Hub Bearing
https://youtu.be/9uOOXPxBr8MThis video starts after you have already Jacked up the Jeep and supported it properly with Jack Stands and the tire is removed.
This is the removal and replacement of a 2009 JKU Passenger Side Hub (Unit) Bearing.
This procedure should work for many other years and models of Jeep. 1987-2018.
There will be slight variations in the years prior to 2007.
Always check the part numbers and application for your specific year.
Hub Bearing: 2007-2011
Part Number 513272 - Cost Approx. $120
Tools used.
Small Pry Bar
Medium Pry Bar
Small hammer / Sledge
36mm or 1 5/16" 1/2" drive socket and Ratchet
21mm wrench or socket
13mm 12 point wrench or 3/8" socket and ratchet
Small Bungie Cord
5mm Hex Allen wrench
Anti-Seize Lubricant
