2007-2018 JK / JKU Ball Joint Replacement DIY
This procedure is very similar on later years of wranglers, please check your specific application for details.
https://youtu.be/MrI2kasm7jwJK and JKU Ball joints are prone to wear and tear/abuse as soon as you lift the Jeep and add big tires. This procedure uses Teraflex Adjustable ball joints, the basic procedure for removal and installation are the same. Slight differences on the lower installation and adjustment, as long as you follow the instructions provided with the ball joints and use the proper tools, everything should be ok.
This procedure will be very similar on other Wrangler Models and Years.
My Tool List: (You may choose to use other methods)
Jack Stands
Some Sort of Jack
Bungee Cord
7mm wrench
21 mm rench
2.5mm Allen (Hex) wrench
5mm Allen (Hex) wrench
3/8" 12 point socket
3/8" Ratchet
1/2" drive 22mm socket
1/2" drive 27mm socket
1/2" drive 32 mm Deep Socket
1/2" drive 36mm socket
1/2" drive 7/8" socket
1/2" drive ratchet or breaker bar
1/2" drive torque wrench
1/4" drive torque wrench
Crowbar
Large Punch
Hammer
Wire Brush
Needle nose or Diagonal Pliers
Pickle Fork
Large Ball Joint service Kit
(Must include the Beveled adapter)
Grease gun and grease
Anti-seize lubricant
