Author Topic: 2007-2018 JK & JKU Hub (Unit) Bearing Removal/Replacement  (Read 4416 times)

Xtremdude

  • Guest
2007-2018 JK & JKU Hub (Unit) Bearing Removal/Replacement
« on: November 12, 2019, 05:12:48 pm »
2007-2018 JK & JKU Hub Bearing

https://youtu.be/9uOOXPxBr8M

This video starts after you have already Jacked up the Jeep and supported it properly with Jack Stands and the tire is removed.
This is the removal and replacement of a 2009 JKU Passenger Side Hub (Unit) Bearing.

This procedure should work for many other years and models of Jeep. 1987-2018.
There will be slight variations in the years prior to 2007.
Always check the part numbers and application for your specific year.

Hub Bearing: 2007-2011
Part Number 513272 - Cost Approx. $120

Tools used.
Small Pry Bar
Medium Pry Bar
Small hammer / Sledge
36mm or 1 5/16" 1/2" drive socket and Ratchet
21mm wrench or socket
13mm 12 point wrench or 3/8" socket and ratchet
Small Bungie Cord
5mm Hex Allen wrench
Anti-Seize Lubricant