Warner Robins Jeep Club
Technical Forums => Jeep Wrangler => Topic started by: Xtremdude on December 04, 2019, 02:27:00 pm
-
Don't forget to Subscribe to this Channel and Be on the look out for more basic and advanced Do it yourself videos in the near future.
Jeep Wrangler JK JKU Pinion Bearing Removal and Replacement
https://youtu.be/05p2_8Ac2Vk (https://youtu.be/05p2_8Ac2Vk)
Refer to JK_JKU Hub Bearing Replacement video for more detailed instructions on removal and Installation of the Hub Bearing and Axle Shaft.
https://youtu.be/9uOOXPxBr8M (https://youtu.be/9uOOXPxBr8M)
Tool Suggested:
1/2" Drive Ratchet
1/2" Drive Breaker Bar
1/2" Drive Torque Wrench capable of 120 ft lbs
3/8" Drive Ratchet
1/4" Drive Inch lb Torque Wrench
29mm or 1 1/8" Socket
21mm Socket
21mm Wrench
16mm Socket
13mm 12 point socket
14mm socket
5mm Hex Wrench (Allen Wrench)
3-5lb Hammer
Various Breaker bars
Various Punches
Seal/Race installer Kit
Bearing Remover
Hydraulic Press
New Bearing Pre-Load 12-15 Inch Lbs as reported by Yukon Gear and Axle
Bearing Caps Torqued to 60 Ft lbs
Pinon Bearing Kit used from AutoZone
Motive Gear- Part Number: R30RJKPK
Approx: $80